English
Applying or releasing the brakes (Continued)
EN
The brake pedals are located on each caster.
To apply the brakes, depress the red pedal. The brake
pedal locks all four casters. This holds the product in
place
(Figure 1-7 on page
To release the brakes, depress the green pedal until the
pedal is in the neutral position
This releases all four casters and allows you to freely
move the product.
1-20
Operation
1-20).
(Figure 1-8 on page
1-20).
KK-7500 REV 02
Figure 1-7: Applying the brakes
Figure 1-8: Releasing the brakes
www.stryker.com