Storing The Battery Long Term; Storing The Power Cord - Stryker SV2 Manual Del Operador

English
Charging the battery (Continued)
EN
To charge the battery, connect the product to a wall outlet. The battery has a full charge within 10 to 12 hours.

Storing the battery long term

WARNING
Always unplug the battery cable from the control box before you store the product for a long period of time.
CAUTION
Do not place or store heavy objects on the product.
Store the battery per the environmental conditions listed in the specifications section (see
To store the battery:
1. See Plugging or unplugging the product on page
2. See Plugging or unplugging the battery cable on page

Storing the power cord

WARNING
• Always store the power cord before transporting the product.
• Always store the power cord to avoid the risk of entanglement, damage to the power cord, or potential shock
hazards. If the power cord is damaged, remove the product from service and contact the appropriate maintenance
personnel.
CAUTION
Do not squeeze or pinch the power cord in the bed frame.
To store the power cord, wrap the power cord around the cord wrap (A) underneath the head end of the product
1-6 on page 1-18).
1-18
Operation
1-17.
1-16.
Figure 1-6: Storing the power cord
KK-7500 REV 02
Specifications on page 1-9).
(Figure
www.stryker.com