Quick Start Wizard Via The Handheld Programmer - Siemens Sitrans LR260 Guia De Inicio Rapido

Key Name
Clear
Decimal
point
Plus or
minus sign
Numeral
to

Quick Start Wizard via the handheld programmer

Notes:
• The Quick Start Wizard settings are inter-related and changes apply only after you click
on Yes in Apply?at the end of the Quick Start steps.
• Do not use the Quick Start wizard to modify individual parameters: see full parameter
listing in Operating Instructions (perform customization for your application only after the
Quick Start has been completed).
1. Quick Start
a) Point the programmer at the display (from a maximum distance of 500 mm [1.6 ft.]),
then press RIGHT arrow
b) Press RIGHT arrow
view.
c) Press RIGHT arrow
values and move directly to the next item.
d) To change a setting, scroll to the desired item or key in a new value.
e) After modifying a value, press RIGHT arrow
to move to the next item.
f) Quick Start settings take effect only after you click Yes in Apply? at the end of the
Quick Start steps.
1.1. Material
STEEL (Default)
Options
CONCRETE
1.2. Response Rate
Sets the reaction speed of the device to measurement changes in the target range.
Options
Use a setting just faster than the maximum filling or emptying rate (whichever is greater).
A5E32106122 SITRANS LR260 (HART) – QUICK START MANUAL
All manuals and user guides at all-guides.com
Function (continued)
Numeric
• Erases the display.
editing
Numeric
• Enters a decimal point.
editing
Numeric
• Changes the sign of the entered value.
editing
Numeric
• Enters the corresponding character.
editing
to activate PROGRAM mode and open menu level 1.
twice to navigate to menu item 1. 1 and open parameter
to open Edit mode or DOWN arrow
SLOW 0.1 m/minute
MED 1.0 m/minute
FAST 10.0 m/minute (Default)
to accept default
to accept it and press DOWN arrow
Page EN-15