Quick Start Wizard Via The Handheld Programmer - Siemens SITRANS LR200 Guia De Inicio Rapido

Key Name
Clear
Decimal
point
Plus or
minus
sign
to
Numeral
o

Quick Start Wizard via the handheld programmer

1. Quick Start
a) Point the programmer at the display from a maximum distance of 300 mm (1 ft), then
press RIGHT arrow
b) Press RIGHT arrow
c) Press RIGHT arrow
values and move directly to the next item.
d) To change a setting, scroll to the desired item or key in a new value.
e) After modifying a value, press RIGHT arrow
to move to the next item.
f) Quick Start settings take effect only after you select Yes to Apply changes in step 1.8.
1.1. Language
Selects the language to be used on the LCD and takes effect immediately.
Options
1.2. Material
Options
1.3. Response Rate
Sets the reaction speed of the device to measurement changes in the target range.
Response Rate
SLOW
MED
FAST
Use a setting just faster than the maximum filling or emptying rate (whichever is greater).
A5E31993614
Function in Edit Mode (continued)
Numeric editing Erases the display.
Numeric editing Enters a decimal point.
Numeric editing Changes the sign of the entered value.
Numeric editing Enters the corresponding character.
to activate PROGRAM mode and open menu level 1.
twice to navigate to menu item 1.1 and open parameter view.
to open Edit mode or DOWN arrow
ENGLISH, DEUTSCH, FRANCAIS, ESPANOL
LIQUID
LIQUID LOW DK (low dielectric liquid)
Fill Rate/Empty Rate
SITRANS LR200 (HART) – QUICK START MANUAL
to accept default
to accept it and press DOWN arrow
0.1 m/min (0.32 ft/min)
1.0 m/min (3.28 ft/min)
10.0 m/min (32.8 ft/min)
Page EN-17