Kit Assembly - Metra 95-3004 Instrucciones De Instalación

ISO DDIN radio provision
1. Attach the radio brackets to the radio
using the screws supplied with
the radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS.
3. After all connections are made, slide
the radio into the dash until the
brackets click in.
4. Snap the ISO DDIN trim plate onto the
factory dash panel.
5. Reassemble the dash in reverse order
of disassembly.

KIT ASSEMBLY

(Figure A)
3
REV. 9/25/2019 INST95-3004