Setting The Operating Mode And Power Level - HEBU medical HRF 100 x-touch Instrucciones Para El Uso

EN
7.7

Setting the operating mode and power level

◼
Operating mode
HRF100 x-touch has two different operating modes for monopolar cutting, two for monopolar
coagulation and two operating modes for bipolar applications (see chapter 4.2 Overview of the
symbols for operating modes and settings). The selection of all modes is based on the same principle.
The field with the illustration of the operating modes must be touched. The selection menu then
opens.
The required operating modes must be selected by touching. To save and return to the main menu,
select the "Exit" field.
Menu: Selection of operating modes
(MONO – CUT)
Menu: Power setting
(MONO- CUT)
Menu:Power setting (BIPOLAR – COAG)
50
◼
(22) button - cutting type I "cutting with minimal
tissue injury
◼
23) button - cutting type II "cutting with medium
(
Tissue injury
◼
(25) button - Save the selected mode
and return to the work page
◼
(25) button – Contact coagulation
◼
26) button – forced coagulation
(
◼
(27) button – Save the selected mode
◼
(28) button – Bipolar forceps
◼
29) button – Bipolar forceps with automatic start
(
◼
(30) button – Save the selected mode and return
to the work page
HBS x-touch 200i