HBS x-touch 200i
◼
Power setting
The power selection menu is identical for all modes.
To set the required power level, touch the power display. The menu for power level selection appears.
Menu: Power setting
All changes are saved automatically. Even after turning off and then again turn the device on, all the
things will remain. If you want to save certain settings from being changed, you will find further
information in chapter 7.8 "Saving and accessing the program" and chapter 7.9 „ Saving the program
against changes"
7.8
Saving and accessing the program
Touching the "Program" field causes a selection of saved
programs to appear.
To select the required program touch the relevant line. The
program you are located in is highlighted in grey.
In the main menu, the number of the accessed program and
the name are displayed
To change the program name, touch the field with the name.
In our example, this is: DR MULLER. A window opens with a keypad. The maximum symbol length
is 15 characters.
To save the name, press "Enter", and to quit without saving, press "Esc".
Every change of the settings is automatically saved in the program you are currently in.
In order to save individual settings in a new program, initially select a free storage location. Settings
and the name of the program can then be changed at will.
Use the arrow keys (32/33), in order to set the required power
setting (31).
To save and return to the main menu, select the "Exit" field.
(34).
EN
51