Integra Omni-Tract Instrucciones De Uso página 4

EN – ENGLISH
Upper Abdominal Retractor System Components
4040 SnapClamp™
4943
Standard Cross Bar
4940
Hinged
Cross Bar
3759 Angled Arm (x2)
Retractor Blades
2
Insert the cross bar (1) into the upper post clamp of the Sterile Field Post and
then into the upper clamp of the other post. Support the clamp while inserting
the cross bar (2). A hinged cross bar has been provided for extremely obese
patients and when table rail extenders are utilized.
4944 Omni-Clamp®
Sterile Field Post (x2)
3623 Blade Holder
1
Determine the location of the Omni-Clamp Sterile Field Post (1) relative to
the surgical field. Place the post on the O.R. table rail over the drape. Rotate
the knob (2) clockwise to secure it to the table. Repeat the above steps
with the second Omni-Clamp Sterile Field Post on the opposite side of the
table. Note: For most abdominal procedures place the Omni-Clamp Sterile
Field Post as close to the arm boards as possible.
3
The cross bar is free to rotate in the post clamps. Adjust the cross arm to the
desired position and lock the upper clamps by pushing the clamp handles
to the up position.
4