Kärcher B 150 R Guia De Inicio Rapido página 5

1 Fillister head screw M8x20, 2 washers, nut M8
2 Damage protection on the left
3 Screw M8x16, washer
Fasten the damage protection on the device.

Transfer the remaining drilled holes to the device.

Drill a 9 mm hole in the front.

Install 2 internal threads M8.

Finally fasten damage protection.

1 Screw M8x16, washer
2 Damage protection on the left
3 Fillister head screw M8x20, 2 washers, nut M8
Fasten the damage protection on the device.

Transfer the remaining drilled holes to the device.

Drill two 9 mm holes in the front.

Install 2 internal threads M8.

Finally fasten damage protection.

2
-
EN 5