Fueling; Fitting The Full Harness - Stihl FS 160 Manual De Instrucciones

English

Fueling

Preparations
MIX
Before fueling, clean the filler cap
N
and the area around it to ensure that
no dirt falls into the tank.
Position the machine so that the
N
filler cap is facing up.
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank. STIHL
recommends you use the STIHL filler
nozzle for fuel (special accessory).
80
Opening the filler cap
N
Filling up with fuel
N
WARNING
After fueling, tighten down the filler cap
as securely as possible by hand.
Changing the Fuel Pickup Body
MIX
Change the fuel pickup body every year:
Drain the fuel tank.
N
Use a hook to pull the fuel pickup
N
body out of the tank and take it off
the hose.
Push the new pickup body into the
N
hose.
Place the pickup body in the tank.
N

Fitting the Full Harness

Full Harness
1
Put on the full harness (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is about a hand's
width below your right hip.
FS 160, FS 220, FS 280, FS 290