Transporting The Unit - Stihl FS 160 Manual De Instrucciones

English
Turn the choke knob away from g.
N
Select the starting throttle position.
N
Start the engine by pulling the
N
starter rope briskly – 10 to 20 pulls
may be necessary.
If the engine still does not start
Move the slide control to STOP-
N
0(h).
Remove the spark plug – see
N
"Spark Plug".
Dry the spark plug.
N
Open the throttle wide.
N
Crank the engine several times with
N
the starter to clear the combustion
chamber.
Refit the spark plug – see "Spark
N
Plug".
Move the slide control to START.
N
Turn the choke knob away from g
N
– even if the engine is cold.
Now start the engine.
N
Throttle cable adjustment
Check adjustment of throttle cable –
N
see chapter on "Adjusting the
Throttle Cable".
If fuel tank has been run completely dry
and then refueled
Crank the engine – note that the
N
engine will not start immediately
because the carburetor first has to
be primed with fuel.
84

Transporting the Unit

Using Transport Guard
The type of transport guard depends on
the metal cutting attachment supplied
with the machine. Transport guards are
available as special accessories.
230 mm Grass Cutting Blades
Grass Cutting Blades up to 260 mm
2.
1.
Disconnect wire rod from the
N
transport guard.
FS 160, FS 220, FS 280, FS 290