Starting / Stopping The Engine - Stihl FS 160 Manual De Instrucciones

English
Starting / Stopping the
Engine
Controls
STOP- START
4 5 6
3
7
2
1 Throttle trigger interlock
2 Throttle lever
3 Slide control
Positions of slide control
4 STOP-0 – engine off – the ignition is
switched off
5 F – normal run position – the engine
is running or can start
6 START – the ignition is switched on
– the engine can start
82
Symbol on slide control
7 h – stop symbol and arrow. To stop
the engine, push the slide control in
the direction of the arrow on the stop
symbol (h) to STOP-0.
Starting
Press down the trigger interlock
N
lever and squeeze the throttle
trigger.
and hold them in that position.
N
Move the slide control to START
N
and hold it there.
Now release the throttle trigger,
N
slide control and trigger interlock in
that order. This is the starting
throttle position.
Choke knob
N
If the engine is cold
1
Turn the choke knob (8)
N
counterclockwise to g.
If the engine is warm
Turn the choke knob (8) clockwise,
N
away from g. Also use this position
if the engine has been running but is
still cold.
8
FS 160, FS 220, FS 280, FS 290
8