Installing The Mowing Deck - Stihl RT 5097.1 Manual De Instrucciones

Releasing the V-belt from the tension
roller (RT 5112 Z, RT 6112 ZL,
RT 6127 ZL):
Push the locking pin (1) approx. 0,5 cm
upwards and hold. Detach the V-belt (2)
from the tension roller (3).
After the V-belt is detached, push
the locking pin down again as far as
it will go until it engages in the
cover. After engagement, check
that the locking pin is securely
seated.
Detaching the mowing deck at the front
(RT 5097, RT 5097 Z):
0478 192 9813 C - EN
Remove the cotter pin (1). Lift the mowing
deck slightly and detach it from the front
mowing deck mounting (2). Carefully
release the mowing deck.
● Repeat this procedure on the other
side.
● Carefully and slowly set down the
mowing deck.
Detaching the mowing deck at the front
(RT 5112 Z, RT 6112 ZL, RT 6127 ZL):
Push the mowing deck (1) forwards
parallel and detach it at the front mowing
deck mounting (2). The mounting
automatically swings upwards.
● Carefully and slowly set down the
mowing deck.
Removing the mowing deck:
● Set the highest cutting level.
Pull the mowing deck (1) out from under
the ride-on mower either to the left or right.

14.2 Installing the mowing deck

Risk of injury!
Prior to all operations on the
mowing deck, carefully read and
observe the section "For your
safety". ( 4.)
Danger of pinching when
installing the mowing deck due to
its inherent weight. Therefore
ensure that no body parts (hands,
fingers, feet, etc.) are positioned
directly under the mowing deck.
● Park the machine on level and solid
ground.
● Turn the front wheels to the left or right
to the stop.
● Stop the engine. ( 13.3)
● Remove the ignition key.
● Engage the parking brake. (
● Select the highest cutting level.
( 13.6)
8.14)
41