Maintenance; General Maintenance Instructions; Maintenance Schedule; Machine - Stihl RT 5097.1 Manual De Instrucciones

Installing the V-belt cover:
Press the retaining plate (1) forwards and
hold in place. Fold the V-belt cover (2)
upwards. Guide the retaining plate (1) to
the rear and engage at the two retaining
tabs (3) on the V-belt cover.
Fasten the retaining plate in place using
the screw (1).
● Install the discharge chute. (
44

15. Maintenance

Risk of injury!
Before all maintenance and repair
work, carefully read and observe
the section "For your safety" and
especially the subsection
"Maintenance and repairs". (
Remove the ignition key
to prevent inadvertent
starting of the engine.
Always wear gloves.
Never touch the mowing
blades before they have
come to a standstill.
For safety reasons, maintenance
operations on the brakes are not
permitted. Only allow adjustment
and maintenance operations to be
performed by a specialist dealer.
STIHL recommends
STIHL specialist dealers.

General maintenance instructions:

● The maintenance schedule and
maintenance intervals must be strictly
observed.
● Observe the maintenance schedule
and maintenance operations in the
engine instruction manual.
Before any maintenance, repair and
cleaning operations:
● Park the machine on level and solid
ground.
● Stop the engine. (
● Engage the parking brake. (
● Allow the engine and muffler to cool
down completely.
15.6)
The following maintenance and repair
work can be found in the engine
instruction manual:
– Replacing the air filter.
– Information on engine oil (type, oil
– Checking and replacing the spark plug.
4.) – Changing the fuel filter.
– Cleaning the engine.

15.1 Maintenance schedule

All the instructions in the maintenance
schedule must be strictly observed.
Non-observance of the maintenance plan
can lead to significant damage to the

machine.

Display of operating hours
(RT 6112 ZL, RT 6127 ZL):
13.3) In order to ensure that the various
maintenance intervals can be observed
8.14)
exactly, the ride-on mowers RT 6112 ZL,
capacity, etc.).
Note
Due to heavy-duty use, especially
in professional operation, shorter
maintenance intervals than those
specified here may be required.
Moreover, extreme external
conditions such as sandy or stony
ground, dust, etc. may lead to
shorter maintenance intervals than
those specified in the instruction
manual.
An inspection by a specialist dealer
must be performed after every 100
operating hours or once a year.
STIHL recommends
STIHL specialist dealers.
0478 192 9813 C - EN