Stihl RT 5097.1 Manual De Instrucciones página 45

Push the locking pin (1) down again as far
as it will go. The locking pin (1) must
engage in the cover (2).
Check that the locking pin is seated
securely.
RT 5097, RT 5097 Z, RT 5112 Z,
RT 6112 ZL, RT 6127 ZL:
Press the retaining plate (1) forwards and
hold. Pull the V-belt (2) forwards and lift
with the V-belt cover.
Fit the V-belt (2) correctly onto the V-belt
pulley (without twisting).
Attaching the mowing deck at the rear:
Before attaching, check that the
mowing deck is correctly attached
at the front mowing deck mounting.
● Raise the mowing deck with one hand
and hold. The bores in the mounting
must be aligned with the retaining pins
on the mowing deck.
0478 192 9813 C - EN
Guide the retaining pins (1) into the bores
in the mounting (2). Insert the cotter pin (3)
into the retaining pin bores from above and
allow to engage.
● Repeat this procedure on the other
side.
Tensioning the V-belt (RT 5097,
RT 5097 Z):
Pull the tension spring (1) forwards and
attach to the mowing deck as shown.
Tensioning the V-belt (RT 5112 Z,
RT 6112 ZL, RT 6127 ZL):
Press the V-belt tensioner lever (1)
forwards and hold. Detach the retainer (2).
Tension the V-belt by relieving the load on
the V-belt tensioner lever (1). Attach the
retainer (2) to the V-belt tensioner lever (1)
as shown.
43