Ethercat Connections - Brooks Instrument GF100 Serie Manual De Instrucciones

Section 2 Installation
GF100 Series

2-19-3 EtherCAT Connections

2-14
Power needs to be supplied via the standard male M8 5-pin connector. The
M8 connector is located on the upper inlet side of the device. Refer to
Figures 2-16 and 2-17 below.
(Refer to Figure 2-17 for Pin-Out Details)
Figure 2-16 GF100 with EtherCAT Communications, M8 Power Connector Location.
Figure 2-17 M8 Power Connector Drawing
Installation and Operation Manual
X-TMF-GF100-Series-MFC-eng
Part Number: 541B137AAG
M8 Connector
PIN Connection
1 +24V
3 Power Common
April, 2017