GE Profile PV970 Serie Manual Del Propietário página 20

INSTALLATION - RECIRCULATING
STEP 4: MOUNT THE HOOD
WARNING
2 people are required to lift and
position the hood onto the mounting screws.
Lift the hood onto the mounting screws.
in front of the flange and not behind it. Check with
a level before tightening screws.
the wall.
Tighten
screws
Install
Bottom
screws
screw
location
20
Installation Instructions
(Cont.)
STEP 5: SIZE AND CUT DUCT PIECE
Measure from the bottom of the air deflector
to the top of the hood as shown. Reduce that
dimension by 1" to facilitate installation. The
duct will cover and overlap the deflector and the
exhaust outlet in the hood.
bracket.
Measure
length
bottom of the deflector.
exhaust outlet.
the deflector and into the bracket.
at the exhaust outlet.
Deflector
Duct length
49-2000916 Rev. 0