Battery; Charging The Battery; Power Saving Mode; Battery Saver Mode - Crosscall CORE-M4 GO Manual Del Usuario

Ocultar thumbs Ver también para CORE-M4 GO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 71

BATTERY

Talk time: 36h
Standby time: 426h
GPS time*: 6h30
*GPS + DATA + GOOGLE maps enabled + 100% Screen brightness
N.B. Battery consumption can be influenced by the quality of the network, the brightness
of the screen, the connections enabled (WiFi, Bluetooth, NFC), location services, etc.

Charging the battery

Be sure to fully charge your device before first use using the AC charger supplied.
Never charge your phone using the X-LINK
connection at the same time, or it may shorten the life of your phone's devices.
1. Open the dust plug and connect the USB cable to the USB power adapter, then plug
the end of the USB cable into the USB port.
2. Plug the USB power adapter into an electrical outlet.
3. When the battery is fully charged, unplug the phone from the charger. First unplug the
charger from the device, then unplug it from the electrical outlet.

Battery Saver Mode

It dims the screen of your phone and limits CPU performance to conserve battery power.
Accessible via the notification bar (by swiping from the top to the bottom of the screen),
icon
battery saver.
To disable this mode, press the same icon again. If you hold down this icon for a few
seconds, you will see information about your battery status.
magnetic connection and the USB
TM*
49

Publicidad

Tabla de contenido
loading

Tabla de contenido