Switching The Phone On And Off; Tips And Precautions For Charging Your Battery - Crosscall CORE-X5 Manual De Instrucciones

Switching the phone on and off

Press and hold the phone's On/Off button and wait a few seconds until the display turns on�
When you switch on your phone for the first time or after performing a data reset, follow the
on-screen instructions to set up your device�
Once the phone is on, this button can also be used to:
• Lock/Unlock your touch screen with a single short press
• Access emergency calls, switch off or restart your phone with a long press�

Tips and precautions for charging your battery

1. Open the dust cap and connect the cable and AC adapter supplied in your
pack using the USB-A port� Then plug the other end of the cable into the
USB-C port on your phone�
2. Plug the AC adapter into an electrical outlet�
3. When the battery is fully charged, unplug the phone from the charger�
First unplug the charger from the device, then unplug it from the
electrical outlet�
Never charge your phone using the X-LINK
connection together, as this could shorten the lifespan of your phone's equipment�
The battery is built into the phone and is not removable� Do not remove the battery
yourself�
*Magconn Technology
magnetic connection and the USB
TM*
62
• To avoid prematurely draining the device's battery, we recommend that you follow the battery
charging instructions for each charging cycle� To do this, it is better to top up the battery
when it reaches 20% and avoid charging it beyond 80%, rather than topping it all the way up
to 100% from zero.
• Only use approved chargers and cables that are compatible with your phone� Using unapproved
chargers or cables may cause the battery to explode or damage the phone�
• Avoid using your phone while it is charging� Do not cover your phone or the AC adapter�
• Connecting the charger incorrectly could seriously damage your phone� Any damage caused
by misuse is not covered by the warranty�
• Remove the charger from the electrical outlet when the phone is not charging�
• The phone may not switch on straight away if you are charging a drained battery� Once it has
been charging for a while, the phone will start normally�
• If the AC power is lower, your phone may take longer to charge�
• If you use unconventional chargers such as computers, the charging time may be longer�
• The charging time may vary depending on the ambient temperature and the remaining battery
level�
• The phone can be safely charged at a temperature between 0°C and 40°C� Charging at
temperatures below 0°C or above 40°C may compromise battery performance and shorten
battery life� Prolonged charging at extreme temperatures will damage the battery�
• During charging, the phone and charger may become hot� This is completely normal and
should not reduce the life or performance of the phone� If the battery seems hotter than
usual, stop charging it� Put your phone in a cool place and leave it to cool� Avoid prolonged
contact with the surface of your phone when it is hot�
The device's features may vary depending on your location, language, operator and
model� This device is OTG compatible� Please use a standard OTG cable�
63