Fein GRIT GIR Instrucciones De Uso página 16

GIR_GIRA - Buch Seite 16 Dienstag, 8. August 2006 11:37 11
EN
Troubleshooting.
Malfunction Cause/Corrective Action
Loud running Centre height not uniform,
noise Adjusting the centre height
Discolouration Feed pressure too high,
of pipe Reduce feed pressure
Heavy forma- Feed pressure too high,
tion of burrs Reduce feed pressure,
Grinding belt worn,
Replace grinding belt
Repair and customer service.
Before any work on the machine itself, pull
the power plug from the socket outlet.
Repairs may be carried out only by quali-
fied persons in conformity with the valid
regulations.
For repairs, we recommend our FEIN customer
service centre, the FEIN authorised service cen-
tres and FEIN agencies.
Carry out the following maintenance regularly:
Daily maintenance
Empty the collection tank. Separate and dis-
pose of water and metal grinding debris.
Open the side cover (5) and remove the
metal grinding debris.
Clean the outside of the machine with com-
pressed air.
Weekly maintenance
Apply oil to moving parts as marked on the
service plate/label.
Monthly measures
Drain the water separator of the com-
pressed-air filter/regulator-lubricator. For
this, reach into the housing from below and
turn the drain valve in clockwise direction.
16
Warranty and liability.
The warranty for the product is valid in accord-
ance with the legal regulations in the country
where it is marketed.
In addition, FEIN also provides a guarantee in
accordance with the FEIN manufacturer's guar-
antee. For further details on this, please contact
your specialist dealer, your national FEIN repre-
sentative, or the FEIN customer service centre.
Declaration of conformity.
The GRIT Corp. declares itself solely responsible
for this product conforming to the documents
and standards given on the last page of this
Instruction Manual.
Environmental protection, disposal.
Stationary machines should be sorted for envi-
ronment-friendly recycling in accordance with
national laws.
Specifications.
Type
Reference number
9 90 0.. ..1 007 00 0
Feed control
Compressed-air
connection:
Operating
pressure [bar]
Air consumption
[l/min.]
Weight according
to EPTA-Procedure
01/2003 [kg]
Connection diagrams.
Type GIRA, Appendix (Pneumatic control system)
GIR/GIRA
GIR GIRA
..1 008 00 0
Manual Automatic
– 6
– 5
109 126