SAFETY AND INFORMATION SIGNS
The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data
B)General hazard: read the manual carefully be-
fore carrying out any procedure.
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
D)General hazard: all relevant regulations must be
complied with. "Install in compliance with the rel-
evant regulations and use in well ventilated
premises only".
E)General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of
failure to comply with the installation and com-
missioning instructions".
F) Burn hazard: watch out for hot surfaces.
G)CE marking: indicates that the appliance is com-
pliant with the relevant norms.
H)Arm crushing hazard: never insert hands in the
pan while in use.
L) Scald hazard: take care, very hot steam.
OPTIONAL ACCESSORIES
The appliance can be equipped with the following
accessories on request.
A)Drain grid
B)Drain siphon
C)Feet
D)"Bridge" installation kit (see page 20)
E)Supporting frame kit (see page 20)
F) Supporting beam kit (see page 20)
G
A
A
C
- 7 -
D
E
C
IDM-39616000400.tif
B
IDM-39616000500.tif
F
H
L
B
IT
GB
DE
FR
ES
English