Hach DR 6000 Manual Básico Del Usuario página 20

Table 3 Options for Single Wavelength
Options Description
For further Options
More
Recall saved measurement data, wavelength scans or time
Recall
courses, refer to
measurement data
page 14.
symbol
Switches from % transmittance to concentration or
% Trans/Abs
absorbance in reading mode.
To input the wavelength setting. Use the alphanumeric

keypad to enter the reading wavelengths. A wavelength in
Wavelength
the range of 190–1100 nm can be entered.
This functions as a stopwatch. It helps to make sure that
the steps of an analysis are correctly timed (e. g. reaction
times, wait times, etc., can be exactly specified). When the
Timer icon
specified time has elapsed, a sound is emitted. The use of
the timer has no influence on the reading program.
Multiplication factor for converting absorbance values into
Concentration
concentration values.
Factor: Off/On
Concentration
To select the number of decimal places.
Resolution
To store the selected parameters as a User Program, refer
to Single Wavelength (absorbance, concentration and
Save as User
transmittance readings), page
Program
English 20
Save, recall, send and delete data,
19.
Table 3 Options for Single Wavelength (Continued)
Options Description
Single Reading: One measurement result is shown after
tapping on Read.
Continuous Readings: After the zero measurement, all
readings are displayed automatically and continuously.
Reading Mode
Carousel 1 inch square: Optional measurement of
carousel insert with up to 5 square cells.
Carousel 1 cm square: Optional measurement of carousel
insert with up to 7 square cells.
Recall saved measurement data, wavelength scans or time
Recall
courses, refer to
measurement data
page 14.
Basic data of the instrument, refer to
Instrument Setup
delete data, page
mode
Save, recall, send and delete data,
Save, recall, send and
14.