Front And Back View; Operating Environment - Hach DR 6000 Manual Básico Del Usuario

1 Inch cells, matched pair
•
Basic DR 6000 user manual, LINK2SC user manual
•
CD-ROM with HACH and HACH-LANGE procedural instructions
•
and extensive operating instructions
Note: If any of these items are missing or damaged, please contact the
manufacturer or a sales representative immediately.

Operating environment

Observe the following points so that the device functions faultlessly and
thus has a long service life.
Place the device securely on an even surface. Push no objects
•
under the device.
Position the device so that the power cord is not impaired.
•
The ambient temperature must be 10–40 °C (50–104 °F).
•
N O T I C E
Protect the instrument from extreme temperatures from heaters, direct sunlight
and other heat sources.
The relative humidity should be less than 80%; moisture should not
•
condense on the instrument.
Leave at least a 15 cm clearance at the top and on all sides for air
•
circulation to avoid overheating of electrical parts.
Do not use or store the device in extremely dusty, humid or wet
•
places.
Keep the surface of the instrument, the cell compartment and all
•
accessories clean and dry at all times. Immediately remove
splashes or spilt materials on or in the instrument (refer to
Maintenance, page 26).
English 8

Front and back view

Figure 1 Front view
USB port type A
1
Cell compartment cover
2
Lamp compartment cover
3
Fan outlet
4
Touch screen
5
Power save key
6
RFID module (not available on all
7
models)