Language Selection - Hach DR 6000 Manual Básico Del Usuario

Ocultar thumbs Ver también para DR 6000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
How to position the universal cell adapter
Open the cell compartment.
1.
Raise the universal cell adapter by approx. 1 cm.
2.
Rotate the universal cell adapter such that the guide of the required
3.
cell profile faces left toward the cell compartment (1).
Press the universal cell adapter down until it snaps into place.
4.
Figure 3 How to position the universal cell adapter
English 10
Startup
Switch on the instrument, startup process
Connect the power cable to a power socket.
1.
Switch on the instrument via the power switch on the back.
2.
The device automatically starts an approximately 45 second long
3.
startup process. The display shows the logo of the manufacturer. At
the end of the startup process, a startup melody is heard.
Note: Wait approximately 20 seconds before switching on again so as
not to damage the electronics and mechanics of the instrument.

Language selection

The DR 6000 software includes several language options. The first time
the instrument is switched on, the language selection screen will be
shown automatically after the startup process.
Select the required language.
1.
Press OK to confirm the language selection. The self-check will
2.
then start automatically.

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido