Other Useful Functions - Sigma EF-630 Manual Del Usuario

LCD PANEL LIGHT (MENU 3)
When the power supply is turned to ON, the LCD panel lights
up. The ON/OFF settings of the light can be changed.
[MENU 3] → [LCD LIGHT]
After 8 seconds of non-operation, the light will
AUTO
turn off. When a button or dial is used while the
(Default)
light is off, the light will automatically turn on.
Regardless of whether a button or dial is being
pressed, the light will turn off after 8 seconds
8 SEC
from when the light initially turned on.
ON The light is kept ON continuously.
Regardless of the setting, the light can be turned on/off with

the button.
LCD PANEL ADJUSTMENT (MENU 3)
The contrast and brightness of the LCD panel can be adjusted.
[MENU 3] → [DISPLAY SETTING]
BRIGHTNESS
BRIGHTNESS Adjust the brightness to the desired level by
using the
CONTRAST
CONTRAST Adjust the contrast to the desired level by
using the
When finalizing the adjustment, select [OK] and confirm with
the button.
When cancelling the adjustment, select [CANCEL] and confirm
with the button.
30
buttons.
buttons.
CHANGING THE UNIT OF MEASUREMENT
INDICATION (MENU 3)
The unit of measurement in the Status area can be changed.
[MENU 3] → [M / FEET]
M (Default) Meter indication
FEET Feet indication
FLASH UNIT INFORMATION (MENU 4)
The following information can be checked.
[MENU 4] → [INFORMATION]
MODEL
Model name
SERIAL No. Serial number
VERSION Firmware version
INITIALIZATION OF SETTINGS (MENU 4)
It is possible to reset the flash unit back to factory settings.
[MENU 4] → [RESET SETTINGS]
To initialize the setting, select [OK] and confirm with the
When the settings are reset, stored custom modes are deleted.


OTHER USEFUL FUNCTIONS

FLASH HEAD SETTING
When the flash head setting is used with
flash head is automatically set to the flash angle that is the
optimal to the lens's focal length.
button.
(Auto), the