Abicor Binzel EN 60 974-7 Instructivo De Servicio página 28

Translation of the original operating instructions
EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these Operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
1 Identification
1.1 EU Declaration of Conformity
1.2 Responsibilities of the User
2 Product Description
2.1 Designated use
2.2 Use contrary to the designated use EN-4
2.3 Technical Data
2.4 Abbreviations
2.5 Nameplate
3 Safety instructions
3.1 Classification
3.2 Emergency information
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Function
6 Putting into operation
6.1 Equipping the manual cutting
torch ABIPLAS
6.1.1 Cutting torch body
6.1.2 Handle
6.2 Equipping the machine cutting
torch ABIPLAS
6.2.1 Machine torch body
6.2.2 Cable assembly
6.2.3 Accessories
EN - 2
EN-3
EN-3
EN-3
EN-4
EN-4
EN-4
EN-6
EN-6
EN-7
EN-7
EN-7
EN-8
EN-8
EN-8
EN-8
EN-9
®
EN-9
CUT
EN-9
EN-10
®
CUT MT EN-10
EN-10
EN-10
EN-10
7 Operation
7.1 Equipping the torch body
7.2 Connecting the plasma-cutting
torch
7.2.1 Compressed air for plasma
and cooling gas.
7.2.2 Filtered compressed air free
of oil and water
7.3 Connecting the machine torch
7.4 Plasma-cutting torch with central
connector
7.5 Before switching on
7.6 Igniting the torch
7.7 Cutting process
8 Putting out of operation
Maintenance and cleaning EN-21
9
9.1 Cable assembly
9.2 Cutting torch
10 Troubleshooting
11 Dismounting
12 Disposal
12.1 Materials
12.2 Consumables
12.3 Packaging
®
ABIPLAS CUT
EN-11
EN-11
EN-17
EN-18
EN-19
EN-19
EN-19
EN-19
EN-20
EN-20
EN-21
EN-22
EN-22
EN-22
EN-23
EN-24
EN-24
EN-24
EN-24