Scope Of Delivery - Abicor Binzel EN 60 974-7 Instructivo De Servicio

4 Scope of delivery

4 Scope of delivery
• Cutting torch body (type as ordered)
• Cable assembly
Scope of delivery
Tab. 8
4.1 Transport
Checking procedure
on receipt of goods
In case of damage
In case of complaints
Packaging for return
shipment
Transport
Tab. 9
4.2 Storage
5 Function
EN - 8
The standard scope of delivery includes the following components:
Order data and ID numbers for the equipment parts and wear parts can be
found in the current order documents. The contact for consulting and ordering
can be found on the Internet at www.binzel-abicor.com.
The scope of delivery is carefully checked and packaged, however damage
may occur during shipping.
Make sure that the shipment is complete by referring to the delivery note!
Check the delivery for damage (visual inspection)!
If the delivery has been damaged during transport, contact the last carrier
immediately! Keep the packaging for possible checks by the carrier.
Use the original packaging and the original packaging material. If you have
questions concerning the packaging and safety during shipment, please
consult your supplier.
Physical storage conditions in a closed environment:
 See Tab. 2 Ambient conditions on page EN-4
All elements together form an operating unit which provides a plasma arc for
cutting when supplied with the appropriate operating resources. When cutting,
compressed air is ionised in the cutting nozzle. The initial arc produces a
conductive plasma which is accelerated in the nozzle and directed to the work-
piece. The working arc is struck between the cutting torch electrode and the
work-piece. The work-piece material is melted by the energy of impact,
dissociation and ionisation and blown out by the kinetic energy of the plasma
jet. The compressed air is used to cool the cable assembly and cutting torch.
• Handle
• Operating instructions
®
ABIPLAS CUT