Connecting The Plasma-Cutting Torch - Abicor Binzel EN 60 974-7 Instructivo De Servicio

®
ABIPLAS CUT
1
®
MT 70
1 ABIPLAS CUT
Overview of clamping range
Fig. 7

7.2 Connecting the plasma-cutting torch

2
®
2 ABIPLAS
Requirements for connecting the torch
1 Use only compressed air which is free of dirt, oil and water.
2 Ensure that the connections are properly assigned and tightened.
3 Ensure that the correct air pressure (flow pressure) and correct air volume
are set. Insufficient air volumes can lead to torch overheating.
MT 110
CUT 3
7 Operation
3
®
MT 150
ABIPLAS CUT
EN - 17