Eaton Powerware 5125 Guia De Instalacion página 25

13. For each optional EBM, slide the EBM rear hold-down bracket into
the slots on the EBM rear panel.
Be sure the rear hold-down bracket is fully seated and then tighten
the wing nut. The EBM is now secured in the rack.
14. Continue to the following section, "Installing the Internal Batteries."
®
EATON Powerware 5125 (9910-P65) UPS Installation Guide for IBM
Figure 9. Securing the Back of the EBM
®
Applications
INSTALLATION
EBM Rear
Hold-Down
Bracket
S 11
164201638 Rev A