Eaton Powerware 5125 Guia De Instalacion página 34

INSTALLATION
8.
NOTE The batteries charge to 80% capacity in approximately 3 hours. However, it is
recommended that the batteries charge for 48 hours after installation or long-term storage.
If you have questions about implementing non- or dual-redundant power,
the following options are available:
S
S
S
S
20
EATON Powerware
If optional EBMs are installed, see "Configuration Mode" on
page 28 to specify the number of EBMs installed.
www.oem.powerware.com/ibm-ups/pdf/nemadiagm.pdf or
www.oem.powerware.com/ibm-ups/pdf/iecdiagm.pdf
Submit your question to "Ask the Expert" at
www.oem.powerware.com/ibm-ups/
Submit your question to our FAQ database at
www.oem.powerware.com/IBM_faq/afmmain.asp
Contact the IBM office or Business Partner servicing your account
®
5125 (9910-P65) UPS Installation Guide for IBM
® S
Applications 164201638 Rev A