Commissioning - SICK WLG16 Instrucciones De Operación

7

COMMISSIONING

7 Commissioning
8
1 Alignment
Align the sensor with a suitable reflector. Select the position so that the red emitted light
beam hits the center of the reflector. The sensor must have a clear view of the reflector,
with no object in the path of the beam
ings of the sensor and reflector are completely clear.
Figure 1: Alignment
2 Sensing range
Adjust the distance between the sensor and the reflector according to the corresponding
diagram [see figure 2].
1
0 1.2
2
0
3
0 2.8
4
0 2.5
5
0
6
0
0 1 2
(3.28) (6.56)
Sensing range
Figure 2: Maximum distance between the sensor and the respective reflector type
Reflector PL10F CHEM
1
Reflective tape REF-AC1000 (50 x 50 mm)
2
Reflector PL10FH-1
3
Test → M
+ (L+)
Test
– (M)
[figure 1]. You must ensure that the optical open‐
4
3.5
5
3 4 5 6
(9.84) (13.12) (16.4) (19.69)
Distance in m (feet)
Test → L+
+ (L+)
Test
– (M)
8020349.14CS | SICK
Subject to change without notice