Transport And Storage; Storage; Transport - MSA alphaFP pro Manual De Funcionamiento

Transport and Storage

5 Transport and Storage
The straps of the harnesses are made of PA or PES. The heat load must therefore
never exceed 100 °C.
5.1

Storage

The belt straps can be damaged by chemicals and lose some of its strength. If pro-
cesses such as discoloration or hardening occur, the product should be taken out
of use for safety reasons.
Storage conditions:
- Dry and clean
- At room temperature
- Protected from light [UV radiation, welding devices, etc.]
- Away from chemicals [acids, bases, liquids, vapours, gases, etc.] and other ag-
gressive conditions
- Protected from objects with sharp edges
5.2

Transport

Suitable packaging has to be used for transport [providing protection against dirt,
moisture, chemicals, UV radiation, mechanical damage, etc.]
20
alpha FP pro/alpha FP basic
MSA
GB