Lcd Base - Triton 4739 Manual De Usuario

NOMENCLATURE

LCD BASE

The LCD Base serves as a programming terminal during the selection
of the traction parameters, as well as a display showing all the factors
affecting the traction during therapy. Traction parameters are selected
with the buttons on the LCD Base and the Touch Screen User Interface.
The Touch Screen and beeper make various audio and visual indications,
and warn the operator when unsuitable parameters are chosen.
1
2
3
6
(1) LED Indicator (Power On/Off)
This indicator will illuminate when the unit is powered on.
NOTE: The LED indicator will blink when the unit goes in screen saver
mode (the screen will go blank after twenty minutes of inactivity).
Simply touch the screen to reactivate.
(2) Clinical Resources
This button allows you to access the following features of the traction
unit:
•
Patient Card
•
Patient Card (Patient Name)
•
Edit Current Pain Profile
•
Edit/Save Completed Pain Profile
•
Erase Patient Card
•
Utilities
4
•
Unit Settings
(3) Stop
This button will stop the treatment program. Traction tension slowly
decreases to zero.
(4) Pause
5
This button will pause the treatment program. Traction tension slowly
decreases to zero. Press the pause button again to resume treatment
program and traction tension.
(5) Start
Touch this button to start the treatment program.
7
(6) Patient Data Card Port
Access port to insert a Patient Data Card to save and retrieve patient
treatments.
(7) Multimedia Card (MMC) Port
Access port to insert a MMC Card to display traction techniques and the
anatomical library.
12
Triton® Traction
•
Protocols
•
Retrieve Protocol
•
Save Protocol
•
Clinical Protocols™