TROUBLESHOOTING
Problem
Unable to properly read Patient Data Card.
Attempted to use an Invalid Patient Data Card.
No Session Data is available on the inserted Patient
Data Card.
Patient Data Card is full.
sEMG Traction button is grayed out.
Possible Remedy
• Properly insert a Patient Data Card.
• Use a known good Patient Data Card.
• If problem persists, contact dealer or Chattanooga Group for service.
• Properly insert a Patient Data Card.
• Use a known good Patient Data Card.
• If problem persists, contact Chattanooga Group for service.
• Save session data to Patient Data Card.
• Use a known good Patient Data Card.
• If problem persists, contact dealer or Chattanooga Group for service.
• Purchase additional Patient Data Cards from an authorized Chattanooga Group
dealer.
• Save to the Patient Data Management System (PDMS).
• An sEMG Module is required to initiate EMG Traction.
• Make sure sEMG Module is properly inserted into the Triton traction unit. If
problem persists, contact dealer or Chattanooga Group for service.
55
Triton® Traction