Attaching The Patient Switch Hook - Triton 4739 Manual De Usuario

SETUP
ATTACHING THE PATIENT INTERRUPT SWITCH HOOK
The Patient Interrupt Switch Hook may be placed on either the left or
right side of the unit to hook the Patient Interrupt Switch.
A screw hole cap with the
Chattanooga Group logo is located
on both sides of the traction unit.
Using a screwdriver, pop the screw
hole cap off.
Place the Patient Interrupt Switch
Hook over the screw hole and tighten
the Hook Screw in place.
23
Triton® Traction
Insert the Patient Interrupt Switch
Hook Cover to cover the hook screw
hole.
The Patient Interrupt Switch can now
be placed on the Patient Interrupt
Switch Hook.