Initial Unit Setup - Triton 4739 Manual De Usuario

SETUP

INITIAL UNIT SETUP

Accessing User Utilities
Turn the unit On.
Press the Clinical Resources button.
Press the Unit Settings button under
the Utilities section.
Clinic Name
Press the Clinic Name button. Enter the Clinic Name on the keyboard.
To save the Clinic Name as entered, press the Return Arrow button. To
discard the Clinic Name, press the Cancel (X) button.
NOTE: The default of the Clinic Name is set as Chattanooga Group.
Volume
Press the Volume button until the desired unit volume is achieved.
There are six settings: Off, X-Low, Low, Med, High and X-High. Each time
the Volume button is pressed, the setting displayed will also give three
audible tones of that level.
NOTE: The default of the unit volume is set at Medium.
Units of Measure
There are three units of measure to choose from: pounds (lbs), kilograms
(kg), and newtons (N). Press the Unit of Measure button to toggle to the
desired unit of measure and the setting will automatically save.
NOTE: The default of the unit of measure is set in pounds (lbs).
Set Date and Time
Press the Set Date and Time button. Press the Move Up or Down Arrow
button for the respective area (Year, Month, Day, Hour and Minute) until
the desired change is displayed.
NOTE: The time is set in a 24-hour format.
26
Triton® Traction