Standards Applied - Ambu aScope BronchoSampler Instrucciones De Uso

1. If suction is deemed relevant, turn the flow switch clockwise to align it vertically and pointing upwards,
and press the suction button on the aScope 4 Broncho. When suction is complete, turn the flow regulator
counter-clockwise towards the sample container, and align it horizontally.
2. Remove the sample container by pressing the flip top, and pull the sample container from the sampler bridge. 7
3. Close the sample container by pressing the sample container lid towards the sample container interface and
engage the click-lock. Once the click-lock is engaged, do not re-open the lid. 8
4.3. Post Procedure
1. If deemed relevant, detach the sampler bridge from the aScope 4 Broncho by disengaging the attachment lock,
and pull the sampler bridge off the aScope 4 Broncho. Disengage suction by pulling the suction tube off the
sampler bridge.
2. If deemed relevant, the sample can be accessed by unscrewing the sample container glass counter-clockwise.
It is recommended to handle contaminated substances in accordance with local guidelines. 9
3. Transportation and handling of sample container must be performed in accordance with local guidelines for
transportation and handling of hazardous material.
Final steps
aScope BronchoSampler™ is a single use device. aScope BronchoSampler™ is considered infected after use and
must be disposed in accordance with local guidelines for collection of infected medical devices.
5. Technical Product Speci cations

5.1. Standards Applied

The aScope BronchoSampler™ function conforms with:
- ISO 8600-1: Endoscopes - Medical endoscopes and endotherapy devices - Part 1: General requirements
- EN 14254: In Vitro Diagnostic medical devices – Single-use receptacles for the collection of specimens, other
than blood, from humans
5.2. aScope BronchoSampler™ Speci cations
Suction Connector
1
Connecting tube with female interface.
Connecting tube with male interface.
Applicable when suction adapter is used.
1. Please check for compatibility with suction tubing before use
Sample Container
Sample Container volume
Storage and transportation
Storage and transportation temperature
Operating environment
Temperature
Sterilisation
Method of sterilisation
8
Specification
ID = Ø7 ± 1 mm
OD = Ø7 ± 1 mm
Specification
30 ml
Specification
10-40°C (50-104°F)
Specification
10 - 40°C (50-104°F)
Specification
ETO