General Information - Bosch T40344/8 Instrucciones Originales

en-gb | 7 | T40344/8

1 General Information

Product name:
Product type:
Product number:
Weight:
Max. load capacity:
Static test coefficient:
Intended use:
The bolt T40344/8 is used with the gearbox support
T40344 or T40344A to lift, hold, and move an 8-gear
0D7 automatic gearbox in an Audi A8 MY 2018.
Terms of use:
Only for qualified workshop personnel.
Use the load holding device only for work approved
by the Volkswagen Group.
Use only for loads up to 220 kg.
Use only for an 8-gear 0D7 automatic gearbox in an
Audi A8 MY 2018.
Use only with the gearbox support T40344 or
T40344A.
Do not hold or lift any persons or animals.
Do not hold or lift items other than those described
in the workshop manuals of the Volkswagen Group
brands.
Do not stand under suspended loads.
Use the gearbox support only with one assistant.
Use only at ambient air temperatures between
-10 °C and +60 °C.
Do not use in a corrosive environment (e.g. acidic or
caustic).
Use only at a humidity level below 50 %.
2019-06-27
Bolt
Load holding device
T40344/8
0.15 kg
220 kg
3.0
Figure 1: Gearbox support T40344
1 Lifting eyes (2 pieces)
2 T40344/6: Retaining flange for VAS 6095/6095A
3 T40344/4: Bolt (to be replaced by T40344/8)
4 Star knobs with adjusting screw (2 pieces)
5 T40344/5: Bolt
Figure 2: Bolt T40344/8
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany