Repair And Warranty - Megger TDR1000 Guia Del Usuario

REPAIR AND WARRANTY

The instrument contains static sensitive devices, and care must be
taken in handling the printed circuit board. If an instrument's protection
has been impaired it should not be used, but sent for repair by suitably
trained and qualified personnel. The protection is likely to be impaired
if for example; it shows visible damage; fails to perform the intended
measurements; has been subjected to prolonged storage under
unfavourable conditions, or has been subjected to severe transport
stresses.
NEW INSTRUMENTS ARE GUARANTEED FOR 3 YEARS FROM
THE DATE OF PURCHASE BY THE USER.
NOTE: Any unauthorized prior repair or adjustment will automatically
invalidate the Warranty.
18
INSTRUMENT REPAIR AND SPARE PARTS
For service requirements for MEGGER Instruments contact:
AVO INTERNATIONAL
Archcliffe Road
Dover Kent, CT17 9EN
England
Tel: +44 (0) 1304 502243
Fax: +44 (0) 1304 207342
Or an approved repair company. Approved Repair Companies
A number of independent instrument repair companies have been
authorised for repair work on most MEGGER instruments, using
genuine MEGGER spare
Distributor/Agent regarding spare parts, repair facilities, and advice on
the best course of action to take.
or AVO INTERNATIONAL
Valley Forge
Corporate Center
2621 Van Buren Avenue
Norristown, PA 19403
U.S.A.
Tel: +1 (610) 676-8579
Fax: +1 (610) 643-8625
parts. Consult the Appointed