ROTHOBLAAS COPPO Normas De Seguridad, Instrucciones De Uso E Instalación página 20

01
02
1/2 1/2 1/2 1/2 1/2 1/2
03
DISTRIBUTION AND DEVELOPMENT
Rotho Blaas srl
Via dell'Adige 2/1 - 39040 Cortaccia (BZ) - Italia
Tel.: +39 0471 81 84 00 | Fax: +39 0471 81 84 84
info@rothoblaas.com | www.rothoblaas.com
20 | COPPO | SAFETY REGULATIONS, INSTRUCTIONS FOR INSTALLATION AND USE
Once the COPPO support has been correctly installed, proceed
with the fastening of the support for PATROL life line, or with the
AOS01 swivelling eyelet.
The elements must be fastened at the threaded end of the M16
stainless steel bolt that protrudes from COPPO's base plate using
the specific self-locking nut and washer included, so that at least
2 mm of thread protrudes from the nut and the element can
rotate freely.
AOS01
PASINT
PATROLTERM
PATROLMED
PATROLINT
Installation manual provided with the product or
downloadable at www.rothoblaas.com
All information reported in this document and the installation
manual is to be considered as instructive and state-of-the-art.
Rothoblaas will not be held responsible for errors in printing,
understanding, interpretation, etc. and does not consider itself
responsible for future changes or regulatory, legislative or
similar developments.