Flash Off; Selecting The Flash Modes - Kodak ADVANTiX Manual De Instrucciones

Flash off

When you do not want to use the flash,
especially indoors where flash is
prohibited, or to capture the ambiance of
existing light, use the flash-off feature.
Use a tripod or place the camera on
another firm support, and use high-speed
film because the shutter speed in these
situations will most likely be slow.

Selecting the flash modes

1. Completely lift up the lens cover/
flash (2) to uncover the lens (7)
and to turn on the camera.
2. Repeatedly press
the fill-flash symbol (39) and flash
indicator (36), flash-off indicator (37),
or auto-flash symbol (38) and flash
indicator (36) with or without the red-
eye-reduction indicator (30) appears
on the LCD panel (23).
(16) until
ENTER
3. Frame your subject within the
viewfinder eyepiece (10).
4. Partially press down the shutter
button (1). When the flash/camera-
ready lamp (11) glows green, fully
press down the shutter button to take
the picture.
The fill-flash and flash-off modes
cancel when you turn off the camera,
select a different flash mode, or
when the camera powers down. The
auto-flash modes remain selected in
these instances.
21