Mid-Roll Change (Mrc); Caring For Your Camera - Kodak ADVANTiX Manual De Instrucciones

Mid-roll change (MRC)

You can remove your film in mid-roll and
later reload it to continue taking pictures.
The Film Status Indicator (FSI) on a
partially exposed film cassette is set
to (#2 position). When you reload the
film cassette into the camera, the camera
automatically advances the film to the
first unexposed frame. Film can be
rewound and reloaded until the last
picture is taken. The camera automati-
cally rewinds the film and sets the FSI
to (#3 position) when the last picture
is taken.
1. Gently press
MRC
button
activator
on the
camera
strap to
start the
auto-film
rewind.
2. See Automatic rewind, steps 1-3.
• Either reinsert the partially exposed
film cassette into the camera to take
more pictures or take it to your photo-
finisher for processing.
(19) with the control-

CARING FOR YOUR CAMERA

• Protect the camera from dust,
moisture, sudden impact, and
excessive heat.
CAUTION: Do not use solvents or
harsh or abrasive cleaners on the
camera body.
• If the lens appears dirty, breathe on it
to form a mist and wipe the surface
gently with a soft, lintless cloth or
lens-cleaning tissue. Never wipe
a dry lens.
CAUTION: Use solvents or solutions
designed for cleaning camera lenses.
Do not use chemically treated tissues
intended for cleaning eye glasses.
• Remove the batteries when you store
the camera for an extended time.
CAUTION: To prevent possible
damage and electrical shock, do not
attempt to disassemble or repair the
camera or flash unit by yourself.
27