Atco Balmoral 14 S Instrucciones De Operación página 14

EURO • Printed in England • BA F016 L69 831 • Balmoral • GB • OSW 10/01
F016 L69 832 - Buch Seite 2 Donnerstag, 25. Oktober 2001 8:31 08
Cylinder Mower Balmoral 14 S Balmoral 14 SE Balmoral 17 S Balmoral 17 SE Balmoral 20 S Balmoral 20 SE
Part number F016 307 542
3
Engine size (cm ) 148
Fuel Tank capacity (l) 1.7
Rated power (kW) 2.15 (3.5 Hp)
Blade width (cm) 35
Height of cut (mm) 6 – 35
Cuts per metre 79
Grassbox capacity (l) 52
Weight (kg) 40
Max overall width (cms) 51
Serial Number See rating details on machine
Intended Use
This product is intended for domestic lawn mowing.
Introduction
This manual gives instructions on the correct assem-
bly and safe use of your machine. It is important
that you read these instructions carefully.
When fully assembled the machine weighs approx-
imately 40–59.5 kg. If necessary, obtain assistance
to remove from packaging.
Take care when transporting the mower to the
lawn, as the blades are sharp.
Delivered Items
Carefully remove the machine from its packaging
and check that you have all the following items:
– Lawnmower with handle assembly
– Operating instructions
– Spare parts list
– Machine registration card
– Engine Maintenace manual
– Petrol tank
– Petrol tank screw
– Allen key
– Handle spindle
– Grassbox
– Grassbox cradle
– Side wheel spindle (incl. of nuts) x 2 side wheel
When parts are missing or damaged, please con-
tact your dealer.
14 • F016 L69 831 • TMS • 18.10.01
Product Specification
F016 307 642 F016 308 542 F016 308 642
148 148 148
1.7 1.7 1.7
2.15 (3.5 Hp) 2.15 (3.5 Hp) 2.15 (3.5 Hp)
35 43 43
6 – 35 6 – 35 6 – 35
79 79 79
52 62 62
42 48 50
51 60 60
1 Handle top
2 Petrol filler cap
3 Petrol tank
4 Grassbox
5 Handle bottom
6 Carburettor
7 Throttle lever
8 Drive control lever
9 Cutter control lever
Not all of the accessories illustrated or described are
included as standard delivery.
A
Handles
Unfold the handle top 1 and secure with the han-
dle clamping lever 10. Make sure the cables do not
become trapped between the handles.
The handle top is height adjustable. The cam lock
spindle 11 can be repositioned indesired position I,
II or III.
Use cable clips 12 to attach cables to bottom han-
dle 5 and top handle 1.
Fit petrol tank to mower 3 using screw 13 and at-
tach petrol pipe 14 to the carburettor 6 using pet-
rol pipe clip.
For convenience when storing, the handle can be
folded by lifting the handle clamping lever 10.
- 2
English
F016 309 542 F016 309 642
148 148
1.7 1.7
2.15 (3.5 Hp) 2.15 (3.5 Hp)
50 50
6 – 35 6 – 35
79 79
70 70
57.5 59.5
68 68
Operating Controls
Assembly