23 9.1 Temporary Shutdown; 23 9.2 Change Of Location; 23 9.3 Disposal And Scrapping; 23 9.3.1 Substances Hazardous To Water - Bosch VLH 2155 Manual Original

Elevador de dos columnas
Ocultar thumbs Ver también para VLH 2155:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
Monthly:
Component
Action
Exposed surfaces and
Cleaning:
edges
Clean all contaminated surfaces and
apply preservative agent if applicable.
Exposed surfaces and
Paintwork care:
edges
Sand down paintwork blemishes with
sand paper (grain size 120) and touch
up with the appropriate RAL shade.
Synchronizing cables
Visual inspection:
and pulleys
Components must not be damaged or
worn.
Typical examples of cable damage: In-
dividual wire breaks, kinking, constric-
tion, flattening, looping, tangling.
Pay particular attention to cables in
the area of the threaded end pieces.
Limit switch
Functional test:
Raise the switch rod.
Every 3 months:
Component
Action
Support arms
Lubricate the shafts (lithium grease).
Mounts
Lubricate the spindles (lithium
grease). Make sure the mounts cannot
be completely screwed out.
Every 6 months:
Component
Action
Hydraulic unit
Check fluid level in tank:
Dipstick must be immersed in fluid
(max. 5 mm) when lifting platform is
fully lowered.
Top up with specified hydraulic fluid if
necessary.
Sliders at lifting car-
Lubricate the inner surfaces of the lift-
riage
ing columns (multi-purpose grease).
Shear connector
Check tightening torque.
Re-tighten to specified torque if nec-
essary.
Robert Bosch GmbH
Decommissioning | VLH 2155 | 33
9.
Decommissioning
9.1
Temporary shutdown
In the event of lengthy periods of non-use:
Disconnect the VLH 2155 from the mains.
Lock the master switch.
9.2
Change of location
If the VLH 2155 is passed on, all the documentation
included in the scope of delivery must be handed over
together with the unit.
The VLH 2155 is only ever to be transported in the
original or equivalent packaging.
Unplug the electrical connection.
Heed the notes on initial commissioning.
9.3
Disposal and scrapping
9.3.1
Substances hazardous to water
!
Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1. Substances hazardous to water must not be allowed
to enter the sewage system.
2. Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
9.3.2
VLH 2155 and accessories
1. Disconnect the VLH 2155 from the mains and detach
the power cord.
2. Dismantle the VLH 2155 and sort out and dispose
of the different materials in accordance with the ap-
plicable regulations.
VLH 2155, accessories and packaging should
be sorted for environmental-friendly recycling.
Do not dispose VLH 2155 into household
waste.
Only for EC countries:
The VLH 2155 is subject to the European
directive 2012/19/EC (WEEE).
Dispose of used electrical and electronic de-
vices, including cables, accessories and batte-
ries, separately from household waste.
Make use of the local return and collection
systems for disposal.
Proper disposal of prevents environmental
pollution and possible health hazards.
en
|
1 689 989 141
2017-05-08

Publicidad

Tabla de contenido
loading

Tabla de contenido