Product Description - Honeywell MILLER DuraSeal Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
General Instruction for Use
EN
Thank you for your purchase of fall protection equipment manufactured
by Honeywell Safety Products. Honeywell brand products are produced to
meet the highest standards of quality at our ISO 9001 certified facility. This
equipment will provide you with years of use when cared for properly.
WARNING
All persons using this equipment must read, understand and follow all
instructions. Failure to do so may result in serious injury or death. Do
not use this equipment unless you are properly trained.
It is crucial that the authorized person/user of this equipment read and
understand these instructions, including marking (see §8). In addition, law
requires employers to ensure that all users are trained in the
proper installation, use, inspection, and maintenance of fall protection equipment.
Fall protection training should be an integral part of a comprehensive safety
program.
Proper use of fall arrest systems can save lives and reduce the potential of
serious injuries from a fall.The user must be aware that forces experienced during
the arrest of a fall or prolonged suspension may cause bodily injury. Consult a
physician if there is any question about the user's ability to use this product.
Pregnant women and children must not use this product.
1- PURPOSE
This equipment is an EN360:2002-certified fall-arrest system, i.e. a personal
protective system against free falls and limiting the force of impact on the user's
body when arresting a fall by absorbing energy (<6kN).
It has undergone a standard EC examination with a notified body, which issued
an EC certificate confirming that all equipment produced and the corresponding
instructions comply with REGULATION (EU) 2016/425 and delivers the following
performance in compliance with standard 360.2002.
The DuraSeal™ Self-Retracting Lifeline (SRL) is designed to perform in the
harshest environments, including onshore and offshore oil and gas, mining and
petrochemical. The sealed technology, reusable brake system, field replaceable
lifeline, and corrosion-resistant materials keep the product in the field where it's
needed.
Conforms to the EC Standard EN360:2002 + the requirements of VG11.062 Rev.4.
1-1 LIST OF PRODUCTS CONCERNED - MODELS, SPECIFICATIONS AND
DIMENSIONS
(cf. I)
1-2 CONTACT
Honeywell Fall Protection Europe SAS
Immeuble Edison - ZI Paris Nord II
33, rue des Vanesses -
BP 55288 Villepinte
95958 Roissy CDG Cedex -FRANCE
 IS.PPE.TECHSUPPORT.EUROPE@honeywell.com
 00 800 33 44 28 03
www.honeywellsafety.com

2- PRODUCT DESCRIPTION

(cf. II)
13

Publicidad

Tabla de contenido
loading

Tabla de contenido