Publicidad
Step 10
First, fi ll two holes in the RIGHT UPRIGHT (D) 1/4 to 1/2 full with GLUE (54M). Then,
å
insert two WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
NOTE: Be sure to position the parts exactly as shown.
å
Now, fi ll the holes in the LEGS (P and R) 1/4 to 1/2 full with GLUE (54M).
å
Fasten the LEGS (P and R) to the RIGHT UPRIGHT (D). Tighten six HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the RIGHT UPRIGHT insert into the
å
LEGS. Wipe away the excess GLUE.
54M
www.sauder.com/services
15F
These surfaces
should be even.
S u r
T W
F A S
15F
These surfaces
should be even.
P
f a c
e w
i t h
I S T
- L O
C K
T E N
®
E R S
D
R
419956
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Edge with hole
Edge with
TWIST-LOCK®
FASTENERS
Edge with hole
Page 15
Publicidad
