Publicidad
Step 17
Locate the TOP (X) and RETURN TOP (Y) and
å
lay them on packing foam or magazines fl at on
the fl oor as shown.
With a drill and 3/16" drill bit, fi nish drilling
å
through the four holes shown based on your
Diagram 1 or 2 preference in step 16.
Drill through these two small
holes for Diagram 2 confi guration.
Drill through these two small
holes for Diagram 1 confi guration.
Meet Parts (X and Y). These components
have been engineered to be lighter,
stronger, faster... well ok. Not technically
faster. But defi nitely makes for a sturdier
L Desk that' s easier to assemble and
friendlier to the environment.
Page 22
CAUTION
Make sure you have
packing foam or
throw away material
underneath the tops
near the drill area.
Drill through these two small
holes for Diagram 1 confi guration.
X
These eight
holes must
be here.
Y
419956
Drill through these two small
holes for Diagram 2 confi guration.
www.sauder.com/services
Publicidad
