Publicidad
Step
Step 32
Refer to the enlarged diagram to identify the parts on
å
the HINGES.
The DOOR may need some adjustments. Follow the text
å
below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), turn the
adjusting screw in or out.
To adjust the DOOR up and down (vertical), loosen both
å
vertical adjustment screws. Move the DOOR up or down to the
desired location. Tighten the screws after making adjustments.
To adjust the DOOR in or out (depth), loosen the mounting
å
screw one turn and move the DOOR in or out, as needed.
Tighten the mounting screw after making adjustments.
www.sauder.com/services
Mounting screw (depth)
(vertical adjustment)
419956
Adjusting screw (horizontal)
Page 37
Publicidad
