Publicidad
Step 18
First, fi ll the holes in the LEGS (H, P, Q, and R) 1/4 to 1/2 full with
å
GLUE (54M). Then, insert the WOOD DOWELS (15F) into the holes.
Wipe away the excess GLUE (54M).
Now, fi ll the four holes in the TOP (X) 1/4 to 1/2 full with GLUE.
å
Fasten the LEFT END (B) and LEFT UPRIGHT (E) to the TOP (X).
å
Tighten four TWIST-LOCK® FASTENERS. Wipe away the excess glue.
NOTE: Be sure the WOOD DOWELS insert into the holes in the TOP.
å
STOP
If you purchased
the 419958
Hutch, assemble
that unit fi rst.
This large hole must be here.
www.sauder.com/services
E
H
X
419956
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
Q
assembling. Disassembly of glued
parts is extremely diffi cult.
B
P
R
54M
15F
Page 23
Publicidad
