Elcometer 480 Guia Del Usuario página 21

10 REVIEWING BATCH DATA - MODEL T (continued)
10.3 BATCH GRAPH (Batch/Review Batch/Batch Graph)
Allows the users to view the readings within the batch as a column bar
graph. Up to five horizontal axes are displayed representing different
values / statistics as follows:
Highest reading in the batch (Hi)
Ÿ
Lowest reading in the batch (Lo)
Ÿ
(for batches of more than one reading)
Average reading for the batch (
Ÿ
(for batches of more than one reading)
High Limit (
Ÿ
(if a Limit Standard was used)
Low Limit (
Ÿ
(if a Limit Standard was used)
Press the 8 softkey to view the batch graph for the each individual
geometry.
If a Limit Standard was not used, the readings are displayed as white
vertical bars. If a Limit Standard was used, readings are displayed as
white bars if within set limits or red; if outside set limits.
If there are more readings in the batch
than can be displayed on a single
screen, multiple readings will be
combined into one bar. Should a
single reading within the 'combined
bar' be outside the set limits, the
whole bar will be red.
Pressing the 'Zoom+' softkey, allows
each individual reading to be
displayed, thereby showing the
individual readings outside the set
limits.
www.elcometer.com
)
)
)
X
R
en-20